Filter
Top Products
OPERATION
2500 01/11 Operation Section 4-2
© 2011 Alamo Group Inc.
OPERATION
RHINO 2500 REAR MOUNTED BLADE
OPERATION INSTRUCTIONS
Your Rhino 2500 should now be assembled and inspected for any evidence of defective or damaged parts
before use. Any evidence of damage should be reported to your dealer immediately. After Hydraulic Lines
have been attached to tractor and Three-Point Hitch attached, carefully remove safety blocks from Moldboard
pivot Point.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper blade
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a rear blade and are not necessarily of a 2500 blade. Some pictures may show
shields removed for purposes of clarity. NEVER OPERATE this implement without all shields in place and in
good operational condition. The operator must be familiar with the blade and tractor operation and all
associated safety practices before operating the blade and tractor. Proper operation of the blade, as detailed
in this manual, will help ensure years of safe and satisfactory use of the rear blade.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)