Filter
Top Products
INTRODUCTION
2500 01/11 Introduction Section 2-3
© 2011 Alamo Group Inc.
INTRODUCTION
The 2500 blade is available in widths of 10' and 12' and features a massive CAT II-III three-point hitch and
quick-hitch. The 12' model is rated for up to 175 PTO HP wheel-type tractors. Hydraulic adjustment of the
mainframe swing, moldboard angle, and moldboard tilt is standard for easier operation. The 2500 blade
features a maximum of 46" of offset for working hard-to-reach areas. The boxed-section, reinforced 1/2” x 20"
moldboard, 4-1/2” solid steel kingpin, and massive hitch and mainframe ensure years of dependable service.
Skid shoes, quick-tach end plates, and dual gauge wheels are optional equipment adding to the many possible
uses of the 2500 blade.
At least 20% or the tractor’s weight must be on the front tires with the implement lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills,
rough terrain, and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).