Agri-Fab 45-04631 Spreader User Manual


  Open as PDF
of 20
 
6
STEP 10: (SEE FIGURE 10)
• Attachtheowcontrolbrackettothehitchtubeusing
two 1/4" x 1-3/4" hex bolts (D), four 1/4" washers (M)
and two 1/4" nylock nuts (J). Do not tighten
completely.
FIGURE 10
FIGURE 9
STEP 9: (SEE FIGURE 9)
• Installthegrip(BB)ontotheowcontrolarm.
• Assembletheadjustablestop(V)totheowcontrol
bracket using the 1/4" x 3/4" carriage bolt (H), nylon
washer (N) and wing nut (U).
STEP 11: (SEE FIGURE 11)
• Installtheendoftheowcontrolrod(10)withnohole
intotheelongatedholeintheowplateonthebottom
ofthehopper.Locktherodintheowplatebyrotating
the rod.
FIGURE 11
FIGURE 12
STEP 12: (SEE FIGURE 12)
• Swingtheowcontrolrodaroundandinserttheend
oftherodintotheowcontrolarm.Secureitwitha
1/4" washer (M) and a 3/32" x 3/4" cotter pin (P).
D
J
M
M
M
P
U
N
V
H
BB
 previous next