Filter
Top Products
4
ASSEMBLY INSTRUCTIONS
FIGURE 2
TOOLS REQUIRED FOR ASSEMBLY
(1) Hammer
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
Lay out and identify parts and hardware using the
illustrations on pages 2 and 3.
STEP 2: (SEE FIGURE 2)
• Attach the hitch support tubes (3), and (4) to the hitch
tube using one 1/4" x 2" hex bolt (C) and 1/4" nylock
nut (J). Do not tighten completely.
STEP 3: (SEE FIGURE 3)
• Insert plugs (AA) into the ends of the hopper support
tubes (5) and (6).
• Attach hopper support tube (5) and hopper support
tube (6) to the hitch support tubes as shown, using
two 1/4" x 1-1/2" hex bolts (E) and 1/4" nylock nuts (J).
Do not tighten completely.
C
J
4
3
FIGURE 3
FIGURE 1
STEP 1: (SEE FIGURE 1)
• Insert a plug (AA) into the end of the hitch tube (9).
• Attach the hitch bracket (8) to the hitch tube using two
5/16" x 1-1/4" hex bolts (G) and 5/16" nylock nuts (I).
Tighten.
• Install the hitch pin (A) in the hitch bracket and hitch
tube and secure it with the hairpin cotter (T).
G
A
T
I
AA
9
8
E
J
E
J
AA
AA
6
5
J
J
B
B
Y
7
STEP 4: (SEE FIGURE 4)
• Insert the bushing (Y) into the cross brace (7).
• Attach the cross brace to the hopper support tubes
using two 1/4" x 2-1/2" hex bolts (B) and 1/4" nylock
nuts (J). Do not tighten completely.
FIGURE 4