Agri-Fab 45-0381 Lawn Aerator User Manual


  Open as PDF
of 12
 
5
10. Secure the axles to axle support brackets using two
washers (K) and 1/8" x 1-1/2" cotter pins (L) at the ends
ofeachaxle.Seegure7.
11. Tighten the four axle brackets assembled in step 10.
Seegure7.
12. Add grease to the spool assemblies through the grease
ttingsuntilgreaseisforcedouttheendsofthespool
tubes.Seegure7.
L
GREASE
FITTING
K
H
I
J
B
O
WEIGHT
BRACKET
STRAP
MAST
EXTENSION
STRAP
J
C
STRAP
MAST
SIDE
P
J
A
AXLE
SUPPORT
BRACKETS
I
H
4. Attach the weight bracket to the tray using a 3/8" x 1"
bolt (H) and 3/8" nylock nut (I). Do not tighten yet. See
gure4.
5. Assemble the straps to the holes in the weight bracket
and the tray that are aligned. Use two 1/2" x 2-1/4" bolts
(B), .75" spacers (O) and 1/2" nylock nuts (J). Do not
tighten yet.Seegure4.
6. Attach the mast extension straps to the front of the tray
using two 1/2" x 1-1/4" bolts (C) and 1/2" nylock nuts
(J). Do not tighten yet.Seegure5.
7. Assemble the mast sides to the straps using the 1-1/2"
spacer (P), 1/2" x 3-1/2" hex bolt (A) and 1/2" nylock
nut (J). Do not tighten yet.Seegure5.
8. Tighten all loose nuts assembled through step 7.
9. Attach the four axle support brackets to the tray using
eight 3/8" x 1" hex bolts (H) and 3/8" nylock nuts (I). Do
not tighten yet!Seegure6.
5
4
6
7
 previous next