Filter
Top Products
4
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
(2) Adjustable Wrench
(2) 3/4" Open or Box End Wrench
(2) 9/16" Open or Box End Wrench
(2) 1/2" Open or Box End Wrench
(1) Pliers
1. Push split bearings (M) into both ends of each double
spooltube.Seegure1.
M
M
2. Assemble a washer (K), 1.65" spacer (E), a washer (K),
a spool assembly, a washer (K), a 5.29" spacer (G), a
washer (K), a second spool assembly, a washer (K),
a 2.38" spacer (D) and a washer (K) onto each of the
axles.Seegure2.
AXLE
D
K
E
G
K
SPOOL
ASSEMBLY
SPOOL
ASSEMBLY
K
K
K
K
Q
R
S
CROSS BRACE
MAST
EXTENSION
STRAP
MAST SIDE
3. Assemble the cross brace, mast extension straps and
mast sides together using two category 1 pins (Q), 7/8"
lock washers (R) and 7/8" hex nuts (S). Do not tighten
yet. Seegure3.
1
2
3