Filter
Top Products
Language Dictionary - 6
87
cfReadTestLog
Syntax
int cfReadTestLog(CF_HANDLE server, CF_READP *read_pos, int bufsize,
char *buffer, int *retcount);
Description
Returns up to bufsize characters from the test log. The test log contains entries which describe
any errors that occur during calibration or selftest. The number of characters read into the buffer
is returned in retcount. The value pointed to by the read_pos argument controls which portion of
the log is read. If this value is the special value CF_READ_FIRST, data is returned starting at the
beginning of the log. Subsequent calls to cfReadSelftestLog use the location pointed to by
read_pos to keep track of the read position. When the retcount argument is 0, the end of the log
has been reached.
The format of the test log is
error-number, error message <newline>
The test log remains readable in the instrument until either the line power is turned off or another
cfSelftest, cfCal, cfCalStandard, or cfCalTransfer command is given.
cfReset
Syntax
int cfReset(CF_HANDLE server);
Description
Sets most programmable functions to their power-on states. This command clears any previously
defined sequence steps and sequence tests and aborts any sequence that may be in progress. All
cell outputs are set to the off state.
cfReset does not affect settings of the following: cfGetSerialConfig, cfReadSerial,
cfGetSerialStatus, or digital configuration. It does not clear any logs or data queues.
cfResetSeq
Syntax
int cfResetSeq(CF_HANDLE server);
Description
Clears any previously defined sequence steps and sequence tests and aborts any sequence that
may be in progress. The server argument can be either a handle to a group obtained by
cfOpenGroup, or a handle to all cells in the instrument if no groups are defined.