Filter
Top Products
68
Using the Agilent 81101A
The Memory Card Screen
Filename Parameter
Move the entry focus to the F
ILENAME
parameter to select a file from the
current directory. Use the knob to scroll through the filenames listed in
the Modify/Enter area.
Memory Card Operations
Move the entry focus to P
ERFORM
O
PERATION
and use the knob to select
the required operation. Press the ENTER key to perform the operation.
R
EAD
C
ARD
Read the DOS file system information from the memory card after
inserting a new card.
R
ECALL
Recall the selected file as the current instrument setting.
S
TORE
Store the current instrument setting to the memory card.
Press ENTER once to start editing the filename for the setting in the
Modify/Enter area. The currently selected filename is used as default.
CAUTION
If you do not modify the filename, the existing file will be overwritten
when you press ENTER.
To modify the filename, move the character cursor with the cursor
keys. Modify a character using the knob. When you have finished,
press ENTER to store the setting.
The filename can be up to 8 characters long.
Press the cursor up or cursor down keys to cancel the store operation
at any time.
Note that the DOS filename suffix .ST0 is added automatically to the
filename when you store the current settings.
S
TORE
A
LL
Store the current instrument setting and the instrument setting
memories 1 to 9 to the memory card. Each setting is stored in a
separate file with the same name but different suffixes (.ST0 for the
current setting, ST1 to ST9 for setting memories 1 to 9).