Filter
Top Products
22
Introducing the Agilent 81101A Pulse Generator
Operating the Agilent 81101A
The
Output screen
allows you to specify timing and level parameters
for the signal to be generated.
Press the OUTPUT
softkey to access
this screen.
In the left part of this screen, you can set up the timing for the signal
(period, pulse width, transition times, ...). The right part is for the levels
(normal or inverted signal, offset and amplitude, impedance, ...).
Furthermore, you can switch on and off the output.
Pressing SHIFT + MORE (GRAPH) when the Output screen is displayed,
toggles between the textual display and a graphical representation of the
parameters. Depending on the current cursor position (left or right part),
the timing parameters or the level parameters are visualized.
Per 1.000
µ
µµ
µ
s Normal
OUTPUT TRG-LEVLIMITSMODE/TRG
OFF
Delay
1
0ps
Width
LeadE
TraiE
100.0ns
5.00ns
=LeadE
Offset
Amplit
+0.0mV
1.00V
50
Ω
ΩΩ
Ω
into 50.0
Ω
ΩΩ
Ω
*OFF
ON
MODIFY
*OFF
ON
OUTPUT TRG-LEVLIMITSMODE/TRG
1
+11V
-11V
Output 1
OFF
µ
µµ
µ
s
1.000
OUTPUT TRG-LEVLIMITSMODE/TRG
1
OFF
PERIOD
Per 1.000
µ
µµ
µ
s Normal
OUTPUT TRG-LEVLIMITSMODE/TRG
OFF
Delay
1
0ps
Width
LeadE
TraiE
100.0ns
5.00ns
=LeadE
Offset
Amplit
+0.0mV
1.00V
50
Ω
ΩΩ
Ω
into 50.0
Ω
ΩΩ
Ω
*OFF
ON
MODIFY