Filter
Top Products
TROUBLESHOOTING
76
SPECIFICATIONS
Indoor Humidity: 20% to 95%
Have questions about product setup or operation? We’re here to help!
24/7 Support:
www.acurite.com
Product Setup & Demo Videos
Product Manuals
Frequently Asked Questions
Register your Product
Support Forum
Submit Feedback & Ideas
IMPORTANT NOTICE
YOUR PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE
www.AcuRite.com
Register this product
to receive 1-year
warranty protection
PRODUCT REGISTRATION
Register a Product
Product Facts
Batteries: 4 x “AA” (not included)
Patent numbers:
5,978,738; 6,076,044; 6,597,990; US 7,637,141 B2
ACURITE® is a registered trademark of
Chaney Instrument Co. Lake Geneva, WI 53147
Limited One Year Warranty
Measurement Ranges
Outdoor Temperature : -40ºF to 158ºF
Indoor Temperature : 32ºF to 122ºF
Wireless Range : 165 ft / 50 m MAX
Lithium Batteries Recommended in
Outdoor Sensor if temperatures are
below -4ºF
www.AcuRite.com
PLEASE DISPOSE OF OLD OR
DEFECTIVE BATTERIES IN AN
ENVIRONMENTALLY SAFE WAY
AND IN ACCORDANCE WITH
YOUR LOCAL LAWS AND
REGULATIONS.
BATTERY SAFETY: Clean the battery contacts
and also those of the device prior to battery
installation. Remove batteries from
equipment which is not to be used for an
extended period of time. Follow the polarity
(+/-) diagram in the battery compartment.
Promptly remove dead batteries from the
device. Dispose of used batteries properly.
Only batteries of the same or equivalent type
as recommended are to be used. DO NOT
incinerate used batteries. DO NOT dispose of
batteries in re, as batteries may explode or
leak. DO NOT mix old and new batteries or
types of batteries (alkaline/standard). DO NOT
use rechargeable batteries. DO NOT recharge
no bars and flashing
“ - - ” temp/humidity data
(877) 221-1252
www.AcuRite.com
Problem
Low or NO
Wireless Sensor
Reception
Display Unit
Screen Not Working
Possible Solution(s)
low reception
NO reception
Relocate the display console and/or the wireless
sensor. Both units must be within 165 feet (50
meters) from each other. Make sure both units are
placed at least 3 feet (.91 m) from other electronic
appliances and devices that may interfere with the
wireless communication (such as TVʼs, microwaves,
computers etc).
NOTE: It may take up to 20 minutes for the display
console to re-synchronize with the sensor when
batteries are replaced.
Use lithium batteries in sensor when temperature is
below -4ºF (-20ºC).
Batteries may need replacing.
Check that batteries are correctly installed.
Reset the display unit and wireless sensor.
Forecast
Seems
Inaccurate
This weather station has a patented 14-day
“Learning Mode” calibration process. During this
Learning Mode the weather station will make
altitude calculations that may affect the accuracy
of the forecast. Once the 14-day Learning Mode
process is complete, the Learning Mode icon will
disappear and the weather forecast is ready for
superior operation.
Make sure the wireless outdoor sensor is placed
outdoors and is placed in a location that will most
accurately report the outside temperature
conditions, these readings directly affect the
forecast feature.