Filter
Top Products
16
*To change from AUTO to MANUAL pressure mode and vice versa, press
AND HOLD the “ ” button for at least 10 seconds. The display indicates
the current pressure mode selected,“AUTO” or “MANUAL”.
After 20 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Note: Calibrations will be erased if the display is reset or if
batteries are removed and the power adapter is unplugged.
Replace Intelli-Time
®
Clock Battery
Intelli-Time technology is powered by a pre-installed coin-cell battery that stores
the time and date settings. The battery has a shelf life of several years. To
replace the Intelli-Time battery:
1. Locate the coin cell battery compartment door on the back of the display
unit. Unscrew and remove
the compartment cover.
2. Insert 1 x CR2032 coin
cell battery into the
battery compartment,
as shown. Install battery
with “+” positive terminal
facing OUT.
3. Screw in the battery
cover.
CR2032
3V