A SERVICE OF

logo

Open as PDF
next previous
Chapter 4 Tutorials
VSG1435-B101 Series User’s Guide
61
the ZyXEL Device. Traffic should be forwarded to the port 666 of the Doom server
computer which has an IP address of 192.168.1.34.
Tutorial: NAT Port Forwarding Setup
Thomas may set up the port settings by configuring the port settings for the Doom
server computer (see Section 12.2 on page 180 for more information).
1 Click Network Settings > NAT > Add new rule and configure the screen with
the following values:
2 The screen should look as follows. Click Apply.
D=192.168.1.34
WAN
LAN
port 666
A
Service Name Doom_Server
WAN Interface Select the WAN interface through which the Doom service is
forwarded. This example uses MyDSLConnection.
External Port/s Enter 666 as the Start and End port.
Server IP Address Enter the IP address of the Doom server. This is 192.168.1.34
for this example.
Protocol Select TCP/UDP. This should be the protocol supported by the
Doom server.