Chapter 9 VLAN
GS2210 Series User’s Guide
90
9.2.1 VLAN Details
Use this screen to view detailed port settings and status of the VLAN group. Click on an index
number in the VLAN Status screen to display VLAN details.
Figure 66 Advanced Application > VLAN > VLAN Detail
The following table describes the labels in this screen.
Status This field shows how this VLAN was added to the Switch.
dynamic: using GVRP
static: added as a permanent entry
Voice: manually added as a Voice VLAN
MVR: added via multicast VLAN registration
MAC-based: manually added as MAC-based VLAN
Change Pages Click Previous or Next to show the previous/next screen if all status information cannot be
seen in one screen.
Table 29 Advanced Application > VLAN: VLAN Status (continued)
LABEL DESCRIPTION
Table 30 Advanced Application > VLAN > VLAN Detail
LABEL DESCRIPTION
VLAN Status Click this to go to the VLAN Status screen.
VID This is the VLAN identification number that was configured in the Static VLAN screen.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked as “–“.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN
was set up.
Status This field shows how this VLAN was added to the Switch.
Dynamic: using GVRP
Static: added as a permanent entry
Voice: manually added as a Voice VLAN
MVR: added via multicast VLAN registration
MAC-based: manually added as MAC-based VLAN
