Page 2-24 Xerox WorkCentre 4118 User Guide
Getting Started
Installing Software
Installing Drivers
Programs for Windows
To use your machine as a printer and scanner in Windows, you must install the MFP driver.
You can install some or all the following components:
¾ Printer driver - Use this driver to take full advantage of your printer’s features. The PCL
Print driver is standard. The PostScript driver is available with the optional Network Kit.
¾ Scan driver - TWAIN and Windows Image Acquisition (WIA) driver is available for
scanning documents on your machine (4 in 1 only).
¾ ControlCentre -
Use this program to create phonebook entries (4 in 1 only), edit printer
settings and upgrade machine firmware.
Macintosh Driver
You can print and scan to and from Macintosh operating systems using your machine. This
driver is available with the optional Network Kit.
Linux Driver
You can print and scan to and from Linux operating systems using your machine. This driver
is available with the optional Network Kit.
System Requirements
Your machine supports the following operating systems.
Windows
98/Me/NT 4.0/2000/XP
The following table shows Windows requirements.
ITEM REQUIREMENTS RECOMMENDED
CPU Windows 98/Me/NT 4.0/
2000
Pentium II 400 MHz or
higher
Pentium III 933 MHz
Windows XP Pentium III 933 MHz or
higher
Pentium IV 1 GHz
