97-0019-01-01 9
Freedom SW Inverter/Charger Mechanical Features
Freedom SW Front and Side Panels
Before you begin to operate the Freedom SW, review the front panel
features shown in Figure 3 and described in the next table. A detailed view
of the lights and buttons on the front panel is shown in Figure 4 and
described in the table next to it.
Figure 3
Isometric View of the Front Panel and Fans
FREEDOM SW
3012
FREEDOM
SW
3012
CLEAR FAULT
RESET
INVERTER
ENABLE
INVERTER
ENABLED
AC IN
FAULT
GEN
SUPPORT
CHARGING
WARNING
Item Description
1 Front Panel contains the Xanbus interface ports for connecting
Xanbus-enabled devices, the INVERTER ENABLE and CLEAR
FAULT RESET buttons, as well as various LED status lights.
See Figure 4.
2 Mounting holes are used for mounting the unit. A total of eight
holes are provided on the unit.
3 Two variable-speed cooling fans are used to cool the unit. Fan
speed control is based on internal temperature of critical
components. The two exhaust fans control airflow though the
transformer and power compartments of the unit. Ensure at least
six inches of clearance for proper ventilation.
Freedom SW 3K2K InvChg Owners Guide.book Page 9 Wednesday, October 9, 2013 1:34 PM
