8
4. PressTIMEonce(theprogrammedtimewillash).Press
or until your selected time appears. The time will
changein15minuteincrements.Whenyourselectedtime
is displayed, press TIME again to return to the change
temperature mode.
5. PressPRGMonce.Thecurrentlyprogrammedstarttime
and setpoint temperature for the 2nd heating program
period will appear.
6. Repeatsteps3and4toselectthestarttimeandheating
temperature for the 2nd heating program period.
7. Repeat steps 3 through 5 for the 3rd and 4th heating
program periods.
8. Press PRGM once. “TU” (indicating Tuesday program)
will appear in the display, along with the start time for
the 1st heating period and the currently programmed
temperature.
9. Repeatsteps3through8tocompleteheatingprogramming
for all periods each day.
10.Whenyouhavecompletedenteringyourheatingprogram,
pressRUN/HOLD.
Enter Cooling Program
1. MoveSYSTEMswitchtoCOOL position.
2. Follow Enter Heating Program for entering your
cooling program, using your selected cooling times and
temperatures.
PROGRAMMING
If the outside temperature is below 50
o
F, disconnect
power to the cooling system before programming.
Energizing the air conditioner compressor during
cold weather may cause personal injury or property
damage.
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one
final time before beginning thermostat operation.
1. MoveSYSTEMswitchtoHEAT position.
2. Press PRGM to view the 1st heating period time and
temperatureforMonday.EachtimeyoupressPRGM,the
next heating period time and temperature will be displayed
insequenceforeachday,(youmaychangeanytimeor
temperatureduringthisprocedure).
3. PressRUN/HOLD.
4. MoveSYSTEMswitchtoCOOL position.
5. Repeatstep2tocheckcoolingprogram.
6. MoveSYSTEMswitchtoHEAT or COOLandpressRUN/
HOLDtobeginprogramoperation.
YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO
PROVIDE MAXIMUM COMFORT AND EFFICIENCY!
