Whirlpool SERIES 940 Manual

A SERVICE OF

next previous

Understanding the status indicators

Lock Out

Rinsing

The Lock Out feature lets

you

lock out the

function of the control

pads. When uslng Lock

Out, you cannot start

the dlshwasher.

To use Lock Out:

l

Press and hold Air Dry

(about 5

seconds)

To turn off Lock Out:

l

Press and hold Air Dry

(about 5

seconds)

until the Lock Out indicator turns off.

Washing

The Washing indicator nlows at the start of

the fist fill of any cycle

(except Rinse/Wash Later)

and remains on until the

end of the main wash.

Water Heating

The Water Heating indicator glows when-

.

The Rinsing indicator glows during the

dishes are not as dry as you expected when

using Air Dry, either allow longer drying

times (overnight) or do nbt use Air Dry.

Clean

The Clean indicator nlows at the end of a

cycle to show that the

load is clean. All other

indicators turn off. The

Clean indicator glows

until you press Cancel/Drain or any other

control pad.

ever water is heated

during a cycle.

17