A SERVICE OF

logo

3. Pull the surface untt stmlght away
tram the receptacle.
Replacing
3. Hold the surface unlt as level as
possible wlm me terminal just
started Into the receptacle.
]
4. LIR out the refiector bowl ond trim
ring.
See Cleaning Chart on page 24
for cleaning instructlcns.
2.
Line up opening in the reflector
bowl ond notch in the trim ring
with the surtace unit receptacle.
4. Push me suriace unit terminal into
me receptacle. When the termlnal
Is pushed into me receptacle as
tar OS It will go, me surface unit will
fit Into me trim rlng.
18