Mixed loads Drying times
When drying a load with different kinds
and weights of fabrics, use the cycle sug-
gested for the lightest fabrics. When the
dryer stops, remove dry items and reset
the control.
To reduce wrinkling, take the load from
the dryer as soon as tumbling stops. This is
Drying times will vary depending on:
l
amount of moisture in the clothes.
l
type and weight of the fabric.
l
size of the load.
l
room temperature around the dryer.
l
temperature of the wash rinse water.
l
amount of lint in the lint screen.
See page 6 in your “Dryer Guide” for
more information.
End-of-cycle signal
3
P
‘/
’ ,\’
The dryer sounds a signal to let you know when
the cycle is finished. The signal cannot be turned
off and is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items that
should be taken out as soon as the dryer stops.
Lint signal
0
D
Clean lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The (whistle tone] signal lets you know
the air flow is being restricted. Restricted air
flow reduces drying efficiency.
Turn off the dryer and clean the lint screen as
shown on page 9.
a
