Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD.
Open the Ird and pull the lint screen
straight out
DO NOT run the dryer with
the lint screen loose,
damaged or missing.
Doing so can cause over-
ROLL the lint off the screen
with your fingers
DO NOT rinse or wash the screen.
Push the screen firmly back into
place
heating, can damage fabrics and
can be a FIRE HAZARD.
Lint removal
Lent can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more otten, depending on
dryer usage.
Heat Element
ELECTRIC DRYERS GAS DRYERS
Cleaning should be done only by a qualified person.
l
Avoid electrical shock
hazard - unplug power
supply cord or turn off
electrical power.
’ Avoid injury or damage - do not
out hands inside cabinet.
’ Make sure dryer is cool
1. Remove back panel [electric] or
front panel [gas)
2. Avoid damaging wires, ther-
mostats, funnel or igniter.
3. Remove lint from shaded area -
see art - with a soft brush or
vacuum cleaner
4. Replace panel; reconnect and re-
level dryer
9
