ENGLISH
|
7
MICROFIBER PADS
1. Lay one Microber Pad on at surface, with fastener strips facing upward.
2. Align Mop Head above Microber Pad. Make sure Mop Head is oriented with pad as shown,
and centered as best as possible (FIGURE 2-A).
3. Press Mop Head rmly down onto Microber Pad. Fastener strips will adhere to Pad Grips on
underside of Mop Head. Pad should now be attached and ready for use (FIGURE 2-B).
4. To remove, use your foot to press down on Microber Pad release tab while simultaneously
pulling Mop Head up off of pad.
CAUTION: Use care when handling a recently used Microber Pad, as it may still be hot.
NOTE: Microber Pads are machine washable. To avoid picking up lint, washing
separately from other fabrics is recommended. Only use liquid detergent. Avoid using
any fabric softeners or bleach. Air drying is recommended; machine drying on a low
setting is acceptable as well.
FIGURE 2
2-B2-A
