A SERVICE OF

logo

CONFIGURING THE ONETOUCH BUTTONS 73
CONFIGURING BEFORE SCANNING
Choosing Configure Before Scan simply opens a scanning interface
when you press or click a button. You can then use the interface to
change the Resolution, Scan Mode, and other settings. When you scan,
the scanned image will still be sent as the file type and to the same
Destination Application already selected in the OneTouch Properties
window for that button.
To configure before scanning:
1. Open the OneTouch Properties window.
2. Select the scan configuration Configure Before Scan.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.