32
• Refer to page 43 for more information on all supported signal source types and resolutions in
PIP mode.
Video Source
• Selects an input source for the LCD monitor to display.
• Press ENTER, and then the or button to change selection.
Auto Adjustment
• Use this function to let the LCD monitor automatically adjust the screen size, horizontal position,
vertical position, clock frequency and phase.
• Press the ENTER button to execute this function.
Note: This item is only available for the VGA and YPbPr inputs.
Clock Frequency
• Adjusts the clock frequency of the PC or YPbPr input image.
• Press the button to expand the width of the image on the screen to the right, or the button to
narrow the width of the image on the screen to the left.
Note: This item is only available for the VGA and YPbPr inputs.
Phase
• Improves focus, clarity and image stability of PC or YPbPr input image by increasing or decreasing
this setting.
• Press button to increase the setting, or button to decrease the setting.
Note: This item is only available for the VGA and YPbPr inputs.
H.Position
• Controls Horizontal Image position of PC input image within the display area of the LCD monitor.
• Press the button to move the screen image to the right, or the button to move the screen image
to the left.
Note: This item is only available for the VGA input.
V.Position
• Controls Vertical Image position of PC input image within the display area of the LCD monitor.
• Press the button to move the screen image up, or the button to move the screen image down.
Note: This item is only available for the VGA input.
Ambient Light Sensor
• Choose to adjust the sensitivity or disable the ambient light sensor of the monitor.
• Press ENTER, and then the or button to select OFF, HIGH or LOW.
Blue Screen
• Turns on or off the blue screen function. If turned on, a blue screen will be displayed when no input
signal is detected by the LCD monitor.
• Press ENTER, and then the or button to turn this function on or off.
Auto Detection
• Choose to let the monitor detect and display available signal sources automatically.
• Press ENTER, and then the or button to turn this function on or off.
Touch feature
• Control Touch function On or Off, once set ON, PIP and Display wall function will be disable.
