Vega Microphone Connection Data: Miniature XLR (TINI "Q-G")
(For Vega Models: T-16, T-17, T-25, T-37, Ranger Transmitters, and BT-2020)
Manufacturer Model Vega Model # Pin #1 Pin #2 Pin #3 Pin #4 Notes
AKG C67, C567 — Shield — White — 2
Audio Technica AT803, 831 — Red/Wh — Yel/Bk Shield 1, 2
Audio Technica ATM71 HM-177X Red — Yellow Shield 2
Beyer MCE5.9 — Inner Sh. — Green Shield 2
Beyer MCE10 — Inner Sh. — Green Shield 2
Crown GLM-100/E LM-202X Red — White Shield
Countryman Various — Red — White Shield 4
Electro-Voice CO-90 — White — Red Shield
Electro-Voice CO-100 LM-208X White — Red Shield 2
Electro-Voice CS-200 LM -209X White — Red Shield 2
Electro-Voice CO2 CO2EX Pink — White Shield 2
PSC Millimic — Red — Shield
Sanken COS-11 — Black — White Shield 2
Sennheiser MKE 2 LM-204X Red — White Shield 2, 7, 8
Sennheiser 40 Red — White Shield 2, 7, 8
Shure 838 113X Red — Black Shield 2, 4
Shure SM83 Red — Black Shield 2, 4
Shure SM84 Red — Black Shield 4
Sonotrim Various — — White — Shield 10
Sony ECM-44_PT LM-201X Red — White Shield 2, 6
Sony ECM-50 PS — Red — White Shield 2
Sony ECM-55_PT — Red — White Shield 2, 6
Sony ECM-66_PT — Red — White Shield 2, 6
Sony ECM-77_PT — Red — White Shield 2, 6
Tram TR-50 (Neg) — Shield — White — 1
Tram TR-50 PS — — White — Shield 1
Vega RSX-7 LM -210X Red — White Shield 2
Vega RSX-11 LM -206X — Red — Shield 2
Vega RSX-12 LM -203X Red/Wh — Yel/Blk Shield 1, 2
General Pos 2 wire — — Audio — Shield
General Pos 3 wire — + Bias — Audio Shield
General Neg 2 wire — Shield — Audio —
General Neg 3 wire — Shield Audio — – Bias
General Hi Output
Dynamic
— — — Wire #1 Wire #2/
Shield
3, 5
Pin Function — — + Bias
(6-9 v)
+ Bias
thru 10 kW
10 kW to
Ground (Audio)
Ground
ww
098- 0306F
www.vegawireless.com
Notes
1) Manufacturer not consistent with wire color code assignments and biasing
arrangements. Some units may have different colors and may require other
bias connections.
2) These microphones are frequently RF sensitive. A small monolithic bypass
chip capacitor (220 to 560 pF) may be required from the signal lead to
ground, or from the bias lead to ground, or both.
3) These transmitters are optimized for use with lavalier electret microphones.
Low output dynamic microphones may not drive the transmitter fully.
4) Some microphones require an electronic equalizing circuit for proper
response. They will operate properly but may not sound exactly like the
wired version.
5)
A Vega 114X adapter cable allows many types of wired handheld mics to
be used with these transmitters. Low output mics may require a step-up
transformer (Shure A97A, or equal)
6)
Wired (i.e., non-“PT”) versions of these mics may not use same color code.
7) These mics have very high output and may not use same color code.
8) These mics have very high output and may overdrive the transmitter. If you
experience difficulties, please consult your dealer or the Vega factory.
9) Some late model Crown PZM mics are not wireless compatible.
