9
QUICK START
This section provides a basic overview on setting up your system. If you need
more specific details, refer to Setup and Installation on page 12.
PREREQUISITES
• Router security level must be a minimum of WPA/WPA2.
• Your router security level must support DHCP protocol and the DHCP option
must be turned on.
• The AppCam and your mobile device must connect to the same WiFi router
for setup.
• Available WiFi-enabled mobile device such as Android or iPhone
smartphone or tablet.
STEP 1 CONNECT APPCAM TO THE NETWORK
Power up your camera and connect it to the router. Attach the antenna to the
AppCam 23.
STEP 2 SET UP CAMERA
Download Uniden’s AppCam app (“Uniden AppCam”) and set up a new system
on your mobile device. When the camera and mobile devices are connected
and you can see video on the mobile device, set up WiFi network management.
After the camera resets, unplug it from your router. Verify that you still have
connection through your mobile device.
