ENGLISH
- 13 -
Portrait orientation on ME201L/ME251i/CCL202/CCL212/CCL250i:
To use ME201L, ME251i, CCL202, CCL212, and CCL250i in portrait orientation, follow
the instructions below.
Note: In a multi-display setup, horizontal span mode is not available (see Chapater 4 for
detailed information on multi-display modes).
1) Select Display Properties>Settings(tab).
2) Select a display icon and click "Advanced."
3) Select the Quadro FX 1500 tab, and a popup menu appears to the side.
Note: When another graphics card coexists, the Quadro FX 1500 tab will not appear.
In that case, a display on another card needs to be detached for now. Right-click the
subject display icon on the Settings tab and uncheck "Attached" from the right-click
menu, or uncheck "Extend my Windows desktop onto this monitor."
4) Select "NVRotate" from the popup menu and "Portrait (90 degree roration)" on the
Quadro FX 1500 tab, and click "OK."
5) When two displays are connected, repeat steps 2 to 4 for the other display.
(Go on to Step
8
.)
8
In a multi-display setup, check the display arrangement by clicking "Identify" on
the Settings tab. The same number as the selected display icon
's appears on the
corresponding display. If necessary, rearrange the icons by dragging them to match
the actual display arrangement.
9
In a multi-display setup, determine a primary display, select the corresponding display
icon, check "Use this device as the primary monitor."
10
Click "OK," and remove the driver CD from the CD-ROM drive.
