A SERVICE OF

logo

Open as PDF
next previous
INSTALLING THE STARTER PAPER ROLL
40
Loading the paper roll
1 Open the paper roll cover.
2 Lift the paper roll holder out of the printer. Notice
that each end of the holder is unique:
a The left side of the holder (closest to the ink
loader) has a removable plastic nut and
endcap.
b The right side of the holder (closest to the
front panel) has a fixed endcap.
NOTE
The endcaps are set up for media rolls with a
three-inch core; if you are using media on a two-inch
core, the endcaps can be adjusted. Refer to Using a
2-inch core media roll: removing the core adapter for
instructions.
9480-07
9480-66
b
a