P7225 2.5 GHz 10X Active Probe User Manua l
29
Appendix A: Specifications
The probe and host instrument must first be allowed to warm up for
20 minutes before measurements are taken.
Specifications
CAUTION. To prevent damage to the probe or circuit under test, do
not apply voltages beyond the nondestructive input voltage range to
the probe .
Table 3: Warranted electrical specifications
Output Zero ±10 mV or less at output of probe
Rise Time (probe only) ≤140 ps
DC Gain Accuracy (probe only) 0.1 ±2% (excludes offset error)
Table 4: Typical electrical characteristics
Bandwidth, (probe only) 2.5 GHz (See Figure 12)
Linear Input Dynamic Range --4.0 V to +4.0 V
(Equivalent to --400 mV to +400 mV
at the output of the probe.)
Delay Time 5.3 ns ±0.2 ns
Offset Range --10.0 V to +10.0 V
System Noise
300 V
rms
or less at output of probe with
probe tip grounded
