A SERVICE OF

logo

3·18
ENGINE
CLUTCH
Remove the clutch cover.
Hold the clutch housing with the special tool.
I
CAUTION
I
Do not damage the clutch plates by the special tool.
i-Mot,
09920-53740: Clutch sleeve hub holder
Remove the clutch springs.
NOTE:
Loosen the clutch spring
set
bolts little
by
little
and
diagonally.
Remove the pressure plate and clutch drive plates and driven
plates.
Remove the spring washer
CD
and washer
(2).
Remove the clutch push piece @, bearing @ and the thrust
washer@.
Remove the clutch push rod ®.
NOTE:
If it is difficult to
pull
out
the
push
rod ®, use a magnetic
hand
or
a wire.