DAW Control GuidE
3-10
Duality Operator’s Manual
Setting Sends Pre/Post Fader
When working with sends it is useful to be able to flip a send between pre and post fader. If necessary, first
select the PRE/POST button (4) on the Master Control Panel. Pushing a channel D-pot will now switch the
selected send on that channel between pre and post. The green LED below the D-pot lights to show PRE is
selected.
To change mode on all channels, press and hold the Master Control Panel OPTION button then press any
channel D-pot. All channels will switch to pre or post.
Muting a Send Output
To mute a send output, select the MUTE button (4) on the Master Control Panel and push the channel D-pot.
The green LED below the channel D-pot will light to show the channel is muted. To mute or un-mute all
channels, press and hold the OPTION button then press any channel D-pot.
Flipping Send Levels to the Faders
To flip send levels from the D-pots to the channel faders, press the Master D-pot (2) – hence Push to Flip! The
channel faders now control send levels and the fader CUT button will mute a send. The channel D-pot controls
panning on stereo sends.
In this ‘flipped’ mode, PRE/POST mode is automatically selected for the D-pot switches, so pushing a D-pot will
toggle the send pre/post on that channel. The green LED below the D-pot lights to show PRE is selected.
Note that the fader SOLO button will still solo the channel, not the send.
