3. Using the Live Mode
If necessary, the prole data can be edited on
the Manual Conguration screen. (41)
1) Select [Prole], and select one of the data
listed in the window.
2) Click [Edit].
3) The “Edit prole” screen will come up.
4) Edit the information required to be revised.
If you want to clear all information in the
window, click [Clear].
5) Click [OK], after the editing is completed.
If you don’t want to store it, click [Cancel].
3.8.3 Editing Prole data
6) The edited prole data is stored and shown in the prole list with the new date
created information, if you click [OK].
• When you edit a prole data, it is strongly recommended to check
that the edited data can work properly by selecting the data at the Prole
connection. (41)
NOTE
3.8 Prole data (continued)
