SPECIALIZED HELMET OWNER’S MANUAL
ABOUT THE LIMITS OF YOUR HELMET
Y
our helmet will not protect against injury in all types of accidents. Even while wearing a helmet, low
speed accidents may r
esult in serious head injury or death.
Because ever
y accident scenario is different, it is impossible to know whether use of a helmet will pro-
vide par
tial or complete protection. Studies have shown that you are better off with a helmet than
without one.
A bicycle helmet does not pr
otect what it doesn't cover, and as noted it may not protect what it does
cover
. A bicycle helmet will not protect against injuries to the spine, neck, or face.
WARNING: No protective headgear can protect the helmet wearer
against all for
eseeable impacts.
Specialized r
ecommends that you choose a helmet which provides the most coverage, as a
helmet that covers mor
e of your head may provide additional protection. Always wear your bicycle
helmet low in the front to protect the forehead. Studies have shown that area is mostly likely to be
impacted in a bicycle crash. Make sure the helmet fits snugly and is tightly fastened at all times.
ABOUT YOUR HELMET
The Specialized helmet is one of the lightest, coolest, most comfor
table helmets available. Your helmet
is intended to r
educe the harmful effects of a blow to the head. Accordingly, the helmet is very care-
fully constr
ucted, and inspected repeatedly during the manufacturing process.
It is extr
emely important to familiarize yourself with the proper use and care of your new helmet. To
do its job, this helmet must fit pr
operly, be worn properly, and be properly fastened.
ABOUT THE W
ARNINGS: This manual and the stickers inside your helmet
contain many instr
uctions and warnings about your helmet. It is impor-
tant for you to understand ever
ything communicated in them before
your first ride. If you do not, please contact your authorized Specialized
retailer with any questions you may have. Also, failure to follow any of
the pr
ovided instructions or warnings could void your warranty, and,
most importantly, could result in severe personal injury or death.
Because of this, we will not r
epeat this in regard to each warning or
instruction.
WARNING: In the event of any impact or blow, do not use this helmet.
Ther
e may be damage invisible to you, which may reduce the ability of
the helmet to reduce the harmful effects of a blow to the head. Such a
helmet should be r
eturned to Specialized for inspection, or destroyed and
replaced.
WEARING THE SPECIALIZED HELMET
THE PROPER FIT
All Specialized helmets are available in a wide range of styles and sizes designed to fit most anyone.
Of course head size is independent of how old you are so select a helmet that fits you snugly with out
being uncomfortably tight.
W
ARNING: For
maximum pr
otec-
tion, this helmet
must be fitted and
attached properly to the
wear
er's head in accor-
dance with the following
instructions. If after
adjustment of the pads
and retention system the
helmet does not fit pr
oper-
ly
, do not use the helmet.
Retur
n it to the Dealer or
Specialized.
HOW
TO FIT THIS HELMET
For pr
oper use, the helmet must
sit level on the head and low on
the for
ehead in the manner
shown in Diagram 1. The
Specialized helmet uses a simple,
quick-release buckle retention
system that, once adjusted, can
be buckled and unbuckled with
-
out changing the adjustment. For
proper use, the straps must be
snugly and evenly tensioned.
To properly fit your helmet:
A) Position the helmet like in Diagram 1. Diagram 2 shows how NOT to position the helmet.
B) Position the U-Turn centered, just below your ears like in Diagram 3.
C) If the helmet needs to be adjusted simply flip the U-T
urn lever upward and adjust the straps.
You want to position the helmet so the helmet is covering your forehead and that the buckle is
positioned under the chin and back against the throat. Lastly adjust the straps so they are
comfor
table around the ears.
D) Once the U-T
urn is in the proper positioning simply flip the lever downward to lock the U-Turn
(Diagram 4) and you should feel a snap. When the U-Turn is in the downward position tug on the
straps to make sur
e the U-Turn is in its fully locked position.
E) With the U-Turn now locked and in the proper position as shown in Diagram 3, it is now time to
adjust the strap tension at the buckle. Adjust the strap tension so that it is snug yet comfortable
(Diagram 5) by pulling both strap ends through the buckle "Ladder Lock" to either tighten or loosen
as needed. Use the "O-Ring" to secure any excess strap as shown in Diagram 6.
WARNING: Always make sure that your U-Turn is in the fully closed and
locked position before riding your bicycle. Never use your helmet with
the U-Turn in the open or unlocked position.
Her
e is a good test for determining if you have properly adjusted your helmet: With the helmet posi-
tioned on your head as shown in Diagram 1, you should feel the chin strap pull fir
mly against your
chin as you open your mouth.
When all straps ar
e evenly tensioned, buckle the chinstrap and attempt to pull the helmet off the front
or rear. If your helmet moves to the front more than 1/2", increase the rear strap tension. With the
chin strap tightly fastened, the helmet should not be able to be r
olled backwards, forwards or side to
side mor
e than approximately 1/2".
Specialized helmets come with either the PRO Fit or FORM Fit Retention systems, which stabilizes
the helmet, helping it stay in position when you ride. When pr
operly adjusted this system will wrap
ar
ound your head and cradle it with firm, but comfortable pressure.
This helmet must be of good fit and the straps adjusted pr
operly to afford pro-
tection in the event of a blow or impact.
WARNINGS: Always make sure the retention system is properly adjusted
and the buckle is pr
operly fastened before you ride. Failure to follow
this instruction could result in serious personal injury, as the helmet may
not stay in position while riding or during a fall. For pr
oper use, make
sur
e the loose end of the strap is tucked through the rubber "O" ring.
Check for pr
oper fit and adjustment often, including each time you wear
it, and periodically during use.
Do not wear anything under
neath your helmet, such as a cap, hood,
bundled hair, headphones, barrettes, as the helmet may loosen or come
of
f. Do not wear anyone else’s helmet and don’t loan your
helmet to anyone else.
CLEANING YOUR SPECIALIZED HELMET
Use only water
, mild soap and non-abrasive cloth to clean the helmet’s shell, pads and retention system.
W
ARNING: This helmet can be damaged by contact with common sub-
stances (for example, certain solvents (ammonia), cleaners (bleach),
paints, abrasives) and this damage may not be visible to the wear
er.
Do not use this helmet if it has been exposed to such substances.
W
ARNING: Do not take risks just because you ar
e wearing a helmet.
W
ARNING: This helmet has been designed for recreational bicycling.
This helmet has not been approved and is not intended for extreme uses
such as downhill racing at high speeds, jumping or leaping with a fully
suspended bicycle, snow sports, water sports, motor sports, street hock-
ey, playground activities, or other activities where face, ear
, or greater
protection or coverage is desired.
This helmet has been tested and cer
tified to meet and exceed the Bicycle Safety Standard for Bicycle
Helmets, 16 CFR 1203. A copy of this regulation can be obtained by visiting CPSC.gov.
W
ARNING: A bicycle helmet is for bicycling only! Always wear a helmet
when bicycling. When you get off your bicycle, remove your helmet. Do
not wear a helmet while climbing tr
ees, in play areas, on playground
equipment, or, at any time while not riding a bicycle. Adults: Instruct
children to follow this warning. Failure to follow this warning could
result in serious personal injury, death by strangulation, death.
The shell of this helmet is constr
ucted of expanded polymer foam.
V
entilation holes may allow harmful objects to pass in the helmet interior.
WARNING: Do not attach anything to your helmet,
including mir
rors or lights.
High temperatures (above 110° F, 43° C) may melt the helmet’s shell. Do
not stor
e your helmet in your car or anywhere else near a heat source.
Do not use if the shell has been melted or defor
med.
The pr
otective capability of your helmet will diminish over time, dependent
upon many factors such as dents, dings, and exposure to pollution,
har
mful chemicals, and long term exposure to the sun. The Snell Memorial
Foundation r
ecommends that helmets be replaced after five years.
Note: The useful life of your helmet may be less than five years as a
r
esult of exposure to sunlight, rough handling/storage that results in
dents or cuts or as a r
esult of heavy use.
ONE YEAR LIMITED WARRANTY
The following information pertains to helmets purchased in the USA only. For warranty information
outside the USA, please contact the authorized Specialized dealer or distributor in your local market.
Specialized Bicycle Components, Inc. war
rants to the Original Purchaser of this product that the prod-
uct is free from defects of material and workmanship under normal use and service for a period of
one (l) year from the date of the original purchase. If within one (l) year from the date of the original
pur
chase, this product is found to be defective in material or workmanship under normal use or ser-
vice, Specialized Bicycle Components, Inc. will, at its sole option, r
epair or replace the product without
charge, provided that the Original purchaser returns the product to an Authorized Dealer indicating
the specific reasons for returning the product and proof of date of purchase. Specialized does not
war
ranty any helmet damaged by heat.
THIS WARRANTY DOES NOT APPLY TO, AND IS VOID AS TO, EFFECTS OR PHYSICAL DAMAGE
RESUL
TING FROM ABUSE, NEGLECT, IMPROPER REPAIR, IMPROPER FIT, ALTERATIONS, MODIFI-
CA
TIONS, OR USE CONTRARY TO THAT INTENDED BY THE MANUFACTURER. SPECIALIZED DIS-
CLAIMS ALL WARRANTIES EXCEPT THE WARRANTY SET FORTH IN THIS SECTION, AND EXPRESS-
LY DISCLAIMS THE WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE AND MERCHANTABILI-
TY
. SPECIALIZED BICYCLE COMPONENTS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING FROM ANY BREACH OF ANY EXPRESSED OR
IMPLIED WARRANTY ON THIS PRODUCT. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER W
ARRANTIES, EXPRESSED OR IMPLIED, AND ALL OTHER REMEDIES GUARANTEES OR
LIABILITIES ARISING BY LAW OR OTHERWISE.
No person or representative is authorized to assume any liability on behalf of Specialized Bicycle
Components, Inc., in connection with the sale of this product.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limita
-
tions on how long an implied warranty lasts, so the above limitation or exclusion may not apply to
you. This war
ranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
ENGLISH
