A SERVICE OF

logo

20
After connections with antennas and other equipment are completed, be
sure to attach the supplied clamp screws to the rear of the TV, and pass
a sturdy cord or chain and attach it to a wall or pillar.
1 Remove one of the two screws at the rear of the TV, then attach the
supplied clamp screw to the screw hole.
Preventing the TV from Falling Down
2 Repeat step 1 to attach the other clamp screw.
3 Attach a sturdy cord or chain securely to each clamp screw, and attach
the cord or chain to a wall or pillar.
Rear of the TV
Attached screw
Clamp screw
(supplied)