92
xDOLBY DIGITAL (DVD VIDEO/DVD-
RW only)
Selects the Dolby Digital signals output via
the DIGITAL OUT (OPTICAL) jack.
xMPEG
Selects the MPEG audio signals output via
the DIGITAL OUT (OPTICAL) jack.
xDTS (DVD VIDEO only)
Selects if DTS signals are output via the
DIGITAL OUT (OPTICAL) jack.
Note
If you select one of the TVS settings while playing a
DVD, the player does not output the following signals
from the DIGITAL OUT (OPTICAL) jack.
• Dolby Digital signals (when you set “DOLBY
DIGITAL” in “AUDIO SETUP” to “D-PCM”)
• MPEG audio signals
D-PCM Select this when the player is
connected to an audio component
lacking a built-in Dolby Digital
decoder. You can select whether
the signals conform to Dolby
Surround (Pro Logic) or not by
making adjustments to the
“DOWNMIX” item in “AUDIO
SETUP” (page 91).
DOLBY
DIGITAL
Select this when the player is
connected to an audio component
with a built-in Dolby Digital
decoder. If the player is connected
to an audio component lacking a
built-in Dolby Digital decoder, do
not set this. Otherwise, when you
play the Dolby Digital sound track,
a loud noise (or no sound) will
come out from the speakers,
affecting your ears or causing the
speakers to be damaged.
PCM
Select this when the player is
connected to an audio component
lacking a built-in MPEG decoder. If
you play MPEG audio sound tracks,
the player outputs stereo signals via
the DIGITAL OUT (OPTICAL) jack.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
OFF
MPEG Select this when the player is
connected to an audio component
having a built-in MPEG decoder. If
the player is connected to an audio
component lacking a built-in MPEG
decoder, do not set this.
Otherwise, when you play the MPEG
audio sound track, a loud noise (or no
sound) will come out from the
speakers, affecting your ears or
causing the speakers to be damaged.
OFF
Select this when the player is
connected to an audio component
lacking a built-in DTS decoder. Note
that the DTS stereo signals are output
in this setting.
ON Select this when the player is
connected to an audio component
having a built-in DTS decoder.
If the player is connected to an audio
component lacking a built-in DTS
decoder, do not set this. Otherwise,
when you play the DTS sound track, a
loud noise (or no sound) will come
out from the speakers, affecting your
ears or causing the speakers to be
damaged.
