KLV-V40A10
2-682-277-11(1)
46
GB
Timer menu
Sets a period of time after which the TV automatically switches itself into standby mode.
Press M/m to select the desired time period in minute (“15M”/“30M”/“45M”/
“60M”/“90M”/“120M”), then press .
The (Timer) indicator on the TV (front) lights up in amber.
Tips
• You can set the sleep timer for any sources by pressing repeatedly.
• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.
• “TV will turn off soon” appears on the screen one minute before the TV switches to standby mode.
• If you press , the remaining time in minutes before the TV switches to standby mode is displayed
on the screen.
Sets a time when the TV automatically switches itself on.
1 Press M/m to select “Timer Set”, then press .
2 Press M/m to select “On”, then press .
The (Timer) indicator on the TV (front) lights up in amber.
3 To set the time, press M/m to select “Time”, then press .
4 Set the hour using M/m, then press ,.
5 Set the minute using M/m, then press .
Tips
• To cancel the on-timer setting, select “Off” in step 2.
• You can set the on-timer in 10-minute increment for up to 12 hours later.
• If the TV is not operated for two hours after it is turned on by the on-timer, the TV automatically
switches itself to standby mode.
You can select the options listed below on the Timer menu.
To select options
1 Press .
2 Press M/m to select , then press .
3 Press M/m to select , then press .
4 Press M/m to highlight the option, then press .
indicates the available options for TV.
indicates the available options for video input.
indicates the available options for PC input.
Sleep Timer
On Timer
Timer
Select:
Enter:
End:
WEGA GATE
Sleep Timer
On Timer
Off
WEGA
GATE
TV
Video
PC
TV
Video
TV
Video
010COV.book Page 46 Tuesday, May 23, 2006 9:06 AM
