18
7. SPECIAL PROGRAMME FEATURES
The top line displays the temperature in the tank, alternating (every
4 seconds) with the programme being performed and the current
programme stage.
The bottom line will show the programme duration “Duration
XX minutes”, where XX is the time left before the end of the
programme, in minutes.
7.1 If DELAYED START (C) is set, until the programme starts the
second line shows the message “Start in YY hh/mm”, where YY
are the hours (from 1-12/1-24 depending on model) or minutes
(when less than 1 hour) left before the programme starts.
Any warning messages (e.g. "No salt”) will appear on the DISPLAY
(G) during the washing stage, alternating with the time left to the end
of the programme.
If the function 3/1 PRODUCTS function (only available on some
models) is set, the no salt and no rinse aid warning messages do
not appear.
7.2 INTERRUPTING A PROGRAMME
To interrupt a programme, press the START/PAUSE button (F)
again and keep it pressed until “Pause” appears on the bottom line
of the DISPLAY (G).
To restart the programme, repeat this operation until "Duration XX
min” reappears on the bottom line of the display.
Opening the door also cuts out the programme in progress,
but this is not recommended, since water splashes or gusts of
steam might escape. When the door is closed the programme
restarts automatically, even it was interrupted by pressing the
START/PAUSE button (F).
EN
Instructions for the User
