6
O
1
ALL-PURPOSE PRESSER FOOT - snap-on
Use for most straight and zigzag seams. The needle opening
is rectangular to accommodate the swing of the needle in a
zigzag stitch. (The machine comes with this foot already
attached.)
O
2
BUTTONHOLE PRESSER FOOT - snap-on
Use for sewing made-to-measure buttonholes.
O
3
BUTTON ATTACHING PRESSER FOOT - snap-on
Holds flat buttons secure for machine stitching in place.
O
4
ZIPPER PRESSER FOOT - screw-on
Adjusts to stitch close to either side of the zipper without
catching the zipper coil.
O
5
BLIND HEM FOOT - snap-on
Features an adjustable guide for positioning and evenly
stitching blind hems, topstitching, or edgestitching.
O
6
OPEN TOE SATIN STITCH FOOT - snap-on
Satin stitching glides comfortably under the sole of this
foot and the open toe provides clear visibility of stitches.
O
7
OVERCASTING FOOT - snap-on
A pin on the foot holds fabric flat when overcasting fab-
ric edges. The guide ensures perfect sewing alignment.
O
8
HEMMER FOOT - snap-on
Rolls fabric edge for narrow hemming.
O
9
EMBROIDERY FOOT - screw-on
Prevents fabric from “flagging” or popping wh
en sewing
free-motion techniques.
O
10
CORDING FOOT - snap-on
Grooves on the foot guide lightweight cords under the
stitches for decorative applications.
O
11
BOBBINS
Hold lower thread. These are “Class 15” bobbins.
O
12
SEAM RIPPER
Use to remove stitching and to open buttonholes.
O
13
SCREWDRIVER
Use to loosen and tighten the presser foot thumb screw,
needle clamp screw
, and needleplate screw.
O
14
FELT CUSHIONS
Fit on the spool pin beneath the thread spool, stabilizing
the spool and preventing the thread from wrapping
around the spool pin.
O
15
NEEDLES
The most commonly used “universal” needles, size #11,
#14, and #16, are included. This machine uses 15x1
household sewing mac
hine needles.
O
16
VIDEO – NOT PICTURED
Step-b
y-step instructions on basic operation of machine.
KNOW YOUR SIMPLICITY SEWING MACHINE
ACCESSORIES
The SIMPLICITY sewing machine comes
with the presser feet and accessories yo
u
will need, conveniently stored in the free
arm cover. This low shank machine uses
snap-on or screw-on presser feet.
O
1
O
5
O
2
O
3
O
6
O
4
O
12
O
14
O
7
O
15
O
11
O
8
O
10
O
13
O
9
