A SERVICE OF

logo

Booting up NS312
Assembly
1. Put in a hard disk drive, if the NS312 version you got already has hard disk drive
installed. Please skip this step and jump to step 2.
(1) Open the upper cover of NS312 through the top 4 screws with your hands.
(2) Use the screws provided in the accessory packet, screw and secure the HDD on the
bracket.
(3) Place the secured HDD in the bracket with lines all connected, and put it back into
the case.
(4) Place the top panel and screw it back onto the case ( Remember to place top panel
so the heat absorbing pad is right above HDD and not above all the lines).
04
User Guide - English