Sierra Wireless 20070914 Manual

A SERVICE OF

next previous

Raven iDEN

9 20070914

b. Toseewhatyouaretypingasyoutypeit,youwill

needtoturnonthe echoand verbosemode.Type

ATE1V1andpressEnter.

c. Ifyougetareplyof“OK”,thenyouenteredthe

commandsuccessfully.Ifyougetareplyof“0”or

“ERROR”,tryenteringthecommandagain.

5. Enter the Master Reset Command for

iDEN

a. TypeAT*PROVISION=000000,01 23456789

b. TheRavenshouldrespondwith:“MasterReset

Succeeded”.Withanyotherresponse,contactTELUS

tochecktheaccountstatus.

c. PresstheresetbuttonontheRaven.

TheRavenshouldnowregisteronthenetwork.

Hardware Installation

YourRavenshouldbemountedinapositionthatallowseasy

accessforthecablessotheyarenotbent,constricted,inclose

proximitytohighamperage,orexposedtoextremetempera

‐

tures.TheLEDsonthefrontpanelshouldbevisibleforeaseof

operationalverification.Youshouldensurethatthereis

adequateairflowaroundthemodembutthatitiskeptfree

fromdirectexposuretotheelements,suchassun,rain,dust,

etc.

Inamobilelocation,suchasacarortruck,ensurethelocation

issecurebothagainstabruptmovementsofthevehicleand

fromotheritemscomingintocontactwiththemodem.

Caution: The Raven is in a hardened case and designed for use in

industrial and extreme environments. However, unless you are using

cables expressly designed for such environments, they can fail if

exposed to the same conditions the Raven can withstand.