11
EENNGGLLIISSHH
WWhheenn CCDD,, VVCCRR22 oorr DDVVDD iiss sseelleecctteedd aass
iinnppuutt ssoouurrccee
EENNGGLLIISSHH
Select the digital or the analog input
connected as desired.
4
Notes:
Extreme settings at high volume may damage your
speakers.
In the Dolby Digital(AC-3) mode, the tone cannot
be adjusted and the tone direct function is
automatically switched to ON.
Adjust the tone (bass and treble).
7
When playing back the program sources with
surround sound, refer to “ENJOYING
SURROUND SOUND” on page 14.
Each time this button is pressed, the corresponding
input is selected as follows ;
OPTICAL COAXIAL ANALOG
To listen to Dolby Digital (AC-3) program source
in the 2-CH downmix mode, in the stereo mode,
the corresponding digital input should be selected.
(For details, refer to “Downmixing into 2 front
channels” on page 17)
Notes:
When the selected optical or coaxial digital input is
not connected, the selected DIGITAL INPUT
indicator is flickering, meaning no sound. (Refer to
“ENJOYING SURROUND SOUND” on page 14.)
The sound from the component connected to the
selected digital input can be heard regardless of the
selected input source.
Adjust the (over all) volume.
6
Operate the selected component for
playback.
5
The TONE DIRECT indicator lights up and the
sound bypasses the tone circuitry.
To cancel the tone direct function, press this button
again.
To listen to a program source without the
tone effect.
8
