7-36
SYSTEM SETTINGS
Contents
* When the automatic document feeder is installed.
Network Settings
X Initial Tab Copy Setting 10 mm (1/2") 7-71
X Disabling Deletion of Job Programs Disabled 7-72
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-72
X Disabling of Auto Paper Selection Disabled 7-72
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-72
X B/W 600dpi x 600dpi Scanning Mode for Document Feeder* Disabled 7-72
X B/W Quick Scan from Document Glass Enabled 7-72
X Auto Clear Before Copy Job Execution Disabled 7-72
● Colour Adjustments 7-73
X Initial Colour Balance Setting Factory default state 7-73
X Auto Colour Calibration – 7-73
Item Factory default setting Page
■ Network Settings
7-74
● IPv4 Settings DHCP 7-74
● IPv6 Settings Disabled 7-74
● Enable TCP/IP Enabled 7-74
● Enable NetWare Disabled 7-74
● Enable EtherTalk Disabled 7-74
● Enable NetBEUI Disabled 7-74
● Reset the NIC – 7-74
● Ping Command – 7-74
Item Factory default setting Page
