11
Part Names and Functions
Top
q
w
e
r LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end (pp.62, 69).
e WARNING indicator
– Lights red when the projector detects an
abnormal condition.
– Blinks red when the internal temperature of the
projector exceeds the operating range (pp.59, 69).
w POWER indicator
– Lights red when the projector is in stand-by
mode.
– Lights green during operations.
– Blinks green in the Power management mode
(pp.50, 69).
r
q ALARM indicator
Blinks red to indicate the battery condition or key
operation.
t ON/STAND-BY button
Turn the projector on or off (pp.20-21).
y INPUT button
Select input source (pp.27, 37, 38).
u POINT ( ed7 8 ) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.22).
– Pan the image in Digital zoom + mode (p.36).
– Adjust the volume level (Point 7 8 buttons)
(p.25).
– Adjust the screen size (Point ed buttons) (p.24).
i SELECT button
– Execute the selected item (p.22).
– Expand or compress the image in Digital zoom
mode (p.36).
!0 MENU button
Open or close the On-Screen Menu (p.22).
o KEYSTONE button
Correct the keystone distortion (pp.24, 45).
t
y
u
i
o
!0
