36
Choose Video or S-video by pressing the VIDEO or the S-
VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
When video input signal is connected to the
VIDEO jack, select Video.
Video
When the input source is coming from video
equipment connected to the COMPUTER IN
1/S-VIDEO IN/COMPONENT IN terminal with a
S-video-VGA cable, select S-VIDEO.
S-video
✔Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.44).
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point buttons to select Input and
then press the Point
or the SELECT button.
Use the Point buttons to select Video and then
press the SELECT button.
S-VIDEO button
Video
S-video
Use the Point buttons to select Computer 1. And then
press the Point button to access the submenu items. Use
the Point buttons to select the S-video and then press
the SELECT button.
Computer
1
Menu Operation
