54
Part names of the remote control
Batteries for the remote control are not supplied. Use two AAA batteries.
b Inserting batteries in the remote control.
1 Take the battery cover off.
2 Place the batteries and fit the cover.
Note: Make sure the batteries are correctly oriented.
b Operation range
1 REC/STOP button
Stops and starts recording of live videos displayed on the
monitor.
2 Numeric buttons
Used to input passwords, camera number and ID number.
3 ID button
If a remote control ID number was set, press before
inputting it. (P32)
4 • SKIP button
During settings: Moves the cursor upward.
During playback: Skips the video 1 minute forward.
5
• f button
During settings: Moves the cursor to the left.
During playback: Fast rewinds.
6
• e button
During settings: Moves the cursor to the right.
During playback: Fast forwards.
7 REPLAY
• button
During settings: Moves the cursor downward.
During playback: Skips the video 1 minute backward.
8 ENTER • c/h button
During settings: Confirms the selected item.
During search: Plays back the selected video.
During playback: Displays a still video.
9 MENU button
Displays the setting menu screen.
F EXIT button (b)
To exit the settings mode and the menu screen.
G SEARCH button
Activates the recorded videos search mode.
H PTZ button
Activates the operation mode that operates the Pan/Tilt/
Zoom/Focus of the dome camera connected to the RS422/
485 terminal.
I MARK • COPY button
Activates the video saving mode.
J SEQ button
Sequences the videos of the connected cameras.
K QUAD button
Displays the quad-screen.
ID
123
456
78
0
PTZ
SEQ
QUAD
COPY
9
MENU EXIT
MARK
SEARCH
REC/STOP
ENTER
SKIP
REPLAY
1
2
3
4
6
F
7
K
I
8
H
G
5
9
J
30° 30°
Max. 5 m
