CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and
cables are sold separately.
1 Make the video signal connection between the camera
and the monitor or time lapse VCR.
2 Insert the plug of this power cord into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on
the monitor using the Brightness and Contrast controls.
Coaxial cable type and maximum length
• Cable type RG-59U, 100 m maximum.
• Cable type RG-39U, 200 m maximum.
CAUTION:
The RG-59U type cable should not be run through electrical
conduits or through the air.
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
1
2
