GB
31
GB
30
This function enables you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Select the television AV or AUX input.
3 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press PLAY ( ).
Otherwise, the cassette is played automatically.
➢ When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
4 To: press:
stop the playback STOP ( ).
eject the cassette EJECT ( ).
Playing a Cassette
3
4
4
Selecting the PLAY SYSTEM Mode
You can choose the PLAY SYSTEM if your system does not match
the SV-5000W VCR.
This function only needs to be used when there is no color or
picture during playback.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding or buttons, until the cursor is placed
in front of the USER SET option.
3 Press the button to select this option.
Result
: The USER SET1 menu is displayed.
4 Press the corresponding or buttons, until the cursor is placed
in front of the PLAY SYSTEM option.
5 Press or buttons until you select the appropriate system is
selected.
Case1 : NTSC or PAL-M Tape Playback
AUTO
➝
NTSC
➝
PAL-M
Case2 : PAL, SECAM, MESECAM Tape Playback
AUTO
➝
PAL
➝
SECAM
➝
MESECAM
6 On completion, press MENU twice to exit the menu.
☛ If you encounter a system error or the picture has no color
when in AUTO mode, select the play system manually.
**
USER SET1
**
TAPE SELECT :E180/
T120
CLOCK TYPE :24H
❿
PLAY SYSTEM :AUTO
OSD :ON
USER SET2
#❷
❿
END:(MENU)
**
M E N U
**
TIMER PROGRAMMING
❿
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
#❷
❿
END:(MENU)
You can cancel any programmes that are:
◆ incorrect.
◆ no longer required.
1 Press TIMER and select STANDARD TIMER.
Result
: The preset programmes are displayed.
2 Select the programme to be cancelled by pressing the or
buttons.
3 Press the CLR/RST button to cancel the selected programme.
Result
: All the recording information is deleted and the broad-
cast will not be recorded.
4 On completion, press MENU twice.
You can check your preset recordings:
◆ when you have finished presetting the VCR ; or
◆ if you have forgotten which programmes will be
recorded.
1 Press TIMER and select STANDARD TIMER.
Result
: The preset programmes are displayed.
2 Press the button to select the PR.
3 Press the or buttons to select the required programme.
4 Press the or buttons to select and change any values as
required.
5 On completion, press MENU twice.
Checking a Preset Recording
Cancelling a Preset Recording
