96
Scanning and Connecting to a Wi-Fi Network
When you turn on Wi-Fi, your phone searches for available
Wi-Fi network access points (hotspots), then displays them in
a pop-up list.
1. From the Notifications bar, sweep your finger
downward to display the Notification Panel.
2. Touch
Wi-Fi
to turn Wi-Fi On.
3. When your phone completes a scan, a list of detected
hotspots appears in the display.
4. Touch a Wi-Fi hotspot to connect.
•
If the Wi-Fi hotspot is open, you will be automatically
connected. (Open hotspots can require to you launch
metroWEB and agree to a set of network usage rules that
appear in the metroWEB window.)
•
If the Wi-Fi network is secured, enter a password at the prompt
to connect.
Adding a Wi-Fi Network Manually
1. Touch
Home
➔
Menu
➔
Settings
➔
Wireless and network
➔
Wi-Fi settings
.
2. Touch
Wi-Fi
to turn Wi-Fi On.
3. Under
Network Settings
, touch
Add Wi-Fi Network
, then
enter these fields:
• Network SSID
: Enter the name of the Wi-Fi Wireless Access
Point.
• Security
: Select the type of security used by the WAP.
• Key (Passphrase)
: If the WAP is secured, enter the password
or alpha-numeric key.
