GB
21
GB
20
The “Show Weak Channels” feature allows you to view channels
with weak reception rather than substitute a blue screen.
1 Open “SETUP MENU”
Press the SETUP button.
2 Select “VCR & Channel Setup”
Using the up/down, move the selection arrow to “VCR & Channel
Setup,” then push right to select.
3 Select “Channel Setup”
Move the selection arrow to “Channel Setup,” then push right to
select.
4 Select “Show Weak Channels”
Move the selection arrow to “Show Weak Channels,” then push
right to select from the following options:
• No - Channels with poor reception will be replaced by a blue
screen.
• Yes - Channels with poor reception will be displayed.
Show Weak Channels
1
Add/Remove Channels
Use this feature if Auto Channel Search missed a channel that you
would like to add, or added a channel you wish to remove.
1 Open “SETUP MENU”
Press the SETUP button.
2 Select “VCR & Channel Setup”
Using the up/down, move the selection arrow to “VCR & Channel
Setup,” then push right to select.
3 Select “Channel Setup”
Move the selection arrow to “Channel Setup,” then push right to
select.
4 Select Channel to Add/Remove
Use the 0–9 buttons to tune in the channel number you wish to add
or remove.
5 Select “Add/Remove Channel”
Move the selection arrow to “Add/Remove Channel,” then push
right to add/remove the channel from your channel list.
• Repeat steps 4 and 5 to add or remove additional channels.
1
01616A DVD-V8000/TWN-Eng2 8/27/56 8:57 AM Page 20
