59
Using Custom Help
5
5 Using Custom Help
Pressing DISP. when [On] is selected for [Custom Help] (GP.104) in
the expanded settings menu (GP.98) displays previously-selected
JPEG images (“custom help”). Custom help is available in the shooting
(GP.62) and playback (GP.72) menus.
Creating Custom Help
The JPEG images must first be copied to a memory card and then
copied from the card to the camera’s internal memory.
1
Ready a memory card.
• Connect the camera or a memory card reader to the computer and
insert a memory card that has been formatted in the camera.
2
Copy the images to the [IMPORT] folder.
• Copy the JPEG images to the [IMPORT] folder on the memory card.
Be sure that the folder contains no more than 99 images.
3
Disconnect the camera or card reader.
• Disconnect the device as described on P.156. If you are using a card
reader, remove the memory card and insert the card in the camera
(GP.27).
4
Select [Admin Mode [Regist]].
• Highlight [Admin Mode [Regist]] in the
expanded settings menu (GP.98) and
press $. You will be prompted to enter
a password.
5
Enter a password.
• Enter the password created using the [Admin Pass Key] option
(GP.104) in the expanded settings menu (GP.98; the default
password is “0000”) and press ADJ./MEMO (for information on
entering a password, see P.91). A confirmation dialog will be
displayed if the password is correct; entering an incorrect password
returns you to the expanded settings menu.
