Replacing Consumables and Maintenance Kit
22
1
The following message appears on
the panel display, and the printer
starts color registration adjustment
automatically. Please wait for a
while.
After finishing adjustment, the fol-
lowing message appears.
S
SS
S
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then press {
{{
{Enter}
}}
}.
T
TT
T
Confirm that the following mes-
sage is displayed on the panel dis-
play, and then load the A3 paper
which comes with the Fusing
Unit in the Bypass Tray.
A Open the Bypass Tray.
B Pull out the Bypass Tray Exten-
sion, and then flip it open.
C Slide the side guides outward
(A
AA
A), and then load paper until
it stops (B
BB
B).
D Adjust the side guides to the
paper width.
Important
❒ Be sure to shuffle the paper
before loading the stack onto
the tray so multiple sheets
are not fed in at one time.
Calibrating...
Initializing...
Please Wait
Press # for
Fuser Adjust
Set Sheet in
Bypass, then #
ZDJH202J
ZDJH203J
ZDJH204J
ZDJH205J
JupP1k_GB_Mainte_F_FM.book Page 22 Thursday, August 22, 2002 4:23 PM
